Combination Chain is used extensively from the cement, paper and pulp, quarrying, and mining industries for elevating and conveying a wide wide variety of abrasive and non-abrasive products. It is also ?nding lots of uses usually in-dustrial assembly conveyors. It is not advisable for drive chain.
The construction of Combination Chain can be both cottered or riveted. Cottered is typically consid-ered conventional. Pins have ?at locations at their ends, which lock to the appropriately punched sidebars, avoiding pin ro-tation through chain operation. All pin holes are clean-cored for smooth bearing surfaces and are dimensioned for proper pin clearance. Market dimensional specifications are rigidly maintained and this chain can be interchanged with links of other manufacturers.
Pitch sizes range from one.631 to six.050 inches; tensile strength selection extends from 12,150 to 67,500 lbs. All Blend block hyperlinks except C55 and C55L have elliptical barrels. This adds added metal in which the sprocket to chain make contact with triggers most chain put on.
MBP 132C has chambered barrels containing grease which lubricates pins, helps to prevent joint freezing, and pro-hibits entry of corrosive and abrasive materials into the bar-rel core.
Attachments are available in many on the pitch sizes to get a wide choice of applications.
Combination links are symmetrical and may well as a result be operated in either course of travel.
Brutaloy and cast steel sprockets are available for each pitch dimension.
COUPLER Back links FOR Mixture CHAIN
Coupler backlinks are necessary for joining chain where no take-up is accessible. Each chain pitch size features a Promal cast off-set sidebar coupler link offered for this objective.