Cycloidal pinwheel reducer is usually a up-dated of different type transmissing machine made with K-H-V less teeth engagement and the cycloidal pin wheel clenching device, which are widely used in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical conveyors, cranes, Industry and project machinery etc. various fields.
Features:

1. Gear is constructed of high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is adopted for all gears, good get in touch with performance and with excessive precision
2. high transmission proficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service life and high bearing capability;
5. convenient to assemble, disassemble and check.

Operation specifications and precautions
1.High modularization design: various equip with various motor or other power input conveniently.Same machine type may equip with various power motor. It is easy to realize the combination and
junction between every equipment type.
2.Transmission ratio: fine division, wide scope. The combined machine type may form large transmission ratio, i.e. output very low rotary speed.
3.Form of installation: the position to be installed is not limited.
4.High strength, small: the box body is made of great strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and good grinding process, therefore the bearing capability of unitvolume is large.
5.Long life: Under the condition of right type chosen (including choosing ideal operation parameters)normal operation and maintenance, the life of main elements of speed reducer (except dressed in parts) shouldn’t be significantly less than 20000 hours. The using parts include lubricating oil seal, oil and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is certainly low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High swiftness ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-downwards ratio and the efficiency is usually more than 90%. If employ multi-speed get the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic tranny principle, the input and outcome shaft are in same axis middle, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can understand high reduction ratio unit.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged as well, and there are two gears engaged with 180 degree symmetry. Therefore, the impact of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the position precision and rotation precision reach an extremely high level.
4. Less parts, convenient installation
The three basic parts achieve a higher deceleration ratio, plus they are all on the same axis, therefore the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the volume is 1/3, the pounds is 1/2, but can buy the same torque capacity and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel material USES particular steel with large fatigue strength.Different from ordinary transmission product, the amount of teeth meshing makes up about in regards to 30% of the full total amount of teeth. Moreover, it is in get in touch with with the surface, so that the pressure borne by each gear is reduced and high torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss caused by friction. Therefore, high reduction ratio can be achieved while maintaining high performance, and miniaturization of traveling motor could be realized.
8. Low noise
The gear meshing cycle acceleration is low, the transmission activity force balance, therefore the operation is quiet, and the vibration is very small.
◆Excessive speed ratio and great efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will end up being larger.
◆Because planetary transmission theory is adopted, the input shaft and end result shaft are on the same axis line, in order that the machine version can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts creates the vibration and voice limited to a minimum.
◆Reliable use and lengthy service life because the primary parts are created from high carbon chromium steel, excessive strength is normally obtained by quenching (HRC58-62), and rolling friction is used in some transmission contacts, therefore the service life is prolonged.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has various advantages, versatile, and can be both positive and negative operation.

•Big ratio, and great efficiency Smooth operation,

• low noise The utilization of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically no wear, durable.

• Compact structure,

• little size Because the application of a planetary transmitting, the input shaft and the output shaft on the same axis, making the model to obtain the smallest possible size.

• Reasonable design, easy maintenance, and break down easily install,

• the least number of parts and straightforward lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion improve the output strength, carrier and precision.

(2).Hoop clamp coupling have five connection methods suited to different application environments.

(3).Size over PL/PF120(incorporating)precision and high strength integral inner gear housing, processed in one station,which eliminate the cumulative mistake and assembling mistake of split type.Remove casting process;adopt sizzling of forging process, that will decrease the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which easier to make gear surface smooth and high precision,decrease the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its effectiveness and mounting dime nsions conform the same kinds of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, low noise, compact structure, beautiful form and radiate heat efficiently.
Very good sealing and adaptability.Its combination with T gear reducer and MB/MBN variator can meet all types of speed requirement.