Any injury over the teeth surfaces of a sprocket diminishes the life with the conveyor chain.
With conventional sprockets, significantly worn sprocket teeth had been repaired by teeth padding or the entire sprocket was replaced. In either case, restore was expensive and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for the dramatic cost savings in cost and time.
Framework
The teeth could be replaced by two methods: individual tooth replacement or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the correct.
The above photograph as well as best proper illustration show a sprocket for individual tooth substitute. Because the joint encounter between the replaced teeth and the sprocket is formed in a unique arc, the bonding accuracy is high plus the sprocket power is enhanced. Furthermore, since the load acting over the mounting bolts is decreased, there may be less possibility of loosening. This sprocket construction is patented.
There are actually two varieties of hubs: cast steel and welded sheet 
steel hubs. Cast steel hubs are made use of for massive sprockets getting heavy loads and welded sheet steel hubs for other applications.
