DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This energy unit includes a electrical power up power down circuit with load holding on the two A & B ports. A stress compensatred movement control might be extra to circuit to manage the decent pace from the cylinder.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic components concerned ahead of installation of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and totally free of impurities. N46 hydraulic oil is encouraged.
4. The electrical power unit must be mounted horizontally.
5. Check the oil level from the tank following the preliminary operating with the power unit.
6. Oil altering is needed right after the original a hundred operation hours, afterwards once each and every 3000 hours.
DUMP TRAILER Power UNIT- SINGLE ACTING
This power unit features a power up gravity down circuit. Start out the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be presented if expected. Also a strain compen sated movement manage might be extra on the circuit to manage the descent pace from the cylinder.
Remark: Please talk to our income engineer for your distinctive pump displacement, motor electrical power or tank capacity.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic components concerned prior to set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities.N46 hydraulic oil is encouraged.
four. The power unit needs to be mounted horizontally.
5. Check the oil degree while in the tank soon after the initial operating on the electrical power unit.
six. Oil modifying is needed following the preliminary a hundred operation hrs, afterwards as soon as every single 3000 hours.