Equipped using the zero leak bidirectional checking sole-noid valves, this power unit is created for the operation of two independent circuits. Which are respectively for that main and subordinate platforms with the double scissors lift. Two cut-off valves are utilized for decreasing the machine manually in case of power loss. If much more independent circuits are expected for your application please get hold of us for availability.
Remark: one. Please seek advice from our sales engineer to the distinct pump displacement, motor power or tank capability.
two. CSA or UL certified motors are available upon request.
1. The AC motor is of S3 duty cycle, which could only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean the many hydraulic components concerned before installation of the energy unit.
3. Viscosity in the oil shoud be 15~46 cst,and also the oil need to be clean and cost-free of impurities,N46 hydraulic oil is proposed.
4. The electrical power unit should really be mounted vertically.
five. Check the oil level within the tank right after the original working of the power unit.
6. Oil shifting is required right after the original 100 operation hours,afterwards the moment each and every 3000 hrs.
Power UNITS FOR DOUBLE-SCISSORS LIFT